2026-03-16

How to install the air source filter of the air source processor?

Regular drainage: According to the drainage method of the filter, perform regular drainage operations to prevent excessive water accumulation from affecting the filtering effect. Regularly replace the filter element: Based on the usage of the filter and the lifespan of the filter element, replace the filter element regularly to ensure the filtering effect. Maintenance: Regularly perform maintenance on the air source filter, including cleaning the surface of the filter, checking the sealing performance at the connection points, etc., to ensure its normal operation.

2026-03-16

What should be noted during the use of the explosion-proof valve position feedback device?

2026-03-16

The difference between an electromagnetic valve and a regular valve

Electromagnetic valves and ordinary valves (typically referring to mechanical valves or manual valves) have significant differences in several aspects. These differences mainly lie in the control principle, structural characteristics, function realization, degree of automation, and application environment.

2026-03-16

Comparison of Advantages and Disadvantages between Pneumatic Actuators and Electric Actuators

Response speed is relatively slow: Compared to pneumatic actuators, electric actuators may have slower start-up and stop speeds, which might affect their application in certain situations that require rapid response. It may be damaged in case of overload: When the electric actuator is overloaded, it may damage the motor or related components, which may increase the maintenance cost and downtime. Initial cost is higher: The purchase cost of electric actuators is usually higher than that of pneumatic actuators, which may increase the initial investment of the enterprise.

2026-03-16

How to handle the failure of the electric actuator?

电动执行器故障处理需遵循“安全第一、诊断先行、分级处理”的原则，以下为系统化解决方案： 一、故障诊断四步法 1、现象观察 运行异常：卡涩、抖动、速度异常 信号异常：反馈丢失、控制失灵 环境异常：过热、噪音、漏油

2024-09-30

Assembly process of the air source processor

Use a fixed bracket to securely install the three-piece assembly. Ensure that the protruding slot of the bracket matches the recessed slot of the body, and then tighten it with screws. Check the arrow markings on the component housing to ensure they are aligned with the airflow direction. Do not install them in the reverse position.